Book a call

Food and beverage inventory management software: what to buy, and what to configure so the margins match the books

Your lots are tracked, your expiry dates are entered, and the margin on last month's batch still does not match the books. This guide shows how to choose food and beverage inventory management software for a packaged food or drink brand, and the setup that makes the data trustworthy.

Fiskal7 min readUpdated
On this page
  1. What should food and beverage inventory management software do?
  2. Restaurant inventory tools or inventory software for a brand: which one fits?
  3. Can QuickBooks Online or Xero track lots and expiry dates on their own?
  4. What does Cin7 Core cost for a food and beverage brand?
  5. Why does the margin on a food batch not match the books?
  6. How does lot tracking help with a recall?
  7. How to set up food and beverage inventory so the data holds
  8. Should you patch your current setup or rebuild it?
  9. Frequently asked questions

TL;DR

  • Food and beverage inventory management software for a packaged food or drink brand needs four things: lot and batch tracking, expiry dates enforced at receiving, a costing method that matches how you pick stock, and a clean sync to QuickBooks Online (QBO) or Xero.
  • Restaurant tools such as MarketMan and BevSpot are built for recipe costing and shelf-to-sheet counts in the back of house, and they are a different category from a brand that makes, stores, and ships packaged goods.
  • Cin7 Core, the inventory platform formerly called DEAR Systems, starts at $349 a month on the Standard plan, and the Advanced plan with warehouse management is $1,199 a month, both on Cin7's pricing page for new customers.
  • Most margin gaps trace to a costing method that does not match the pick rule, an expiry date missed at goods-in, or a landed cost sitting in expenses, and each is usually fixable through configuration.
  • The FDA moved the FSMA 204 traceability compliance date to July 20, 2028, so the data you capture at receiving this quarter is the data you will need to produce later.

Here is a pattern that shows up in food and drink brands between $1m and $100m. The warehouse picks the nearest pallet, the system records a different batch leaving the building, and cost of goods sold lands on the wrong lot. Finance sees a margin that moves for no reason, the accountant books a journal to close the gap, and the next month it opens again. Your physical process and system process are no longer in sync.

This post covers how to choose food and beverage inventory management software when you make, store, or distribute packaged goods, where the tools differ, and the configuration that decides whether any of them produces numbers you can trust.

What should food and beverage inventory management software do?

It should track every unit by lot and expiry date, pick stock in the order your business sells it, and pass the right cost to your accounting system. Anything less leaves finance reconciling by hand.

Search results for this topic lean heavily towards restaurant platforms, where the job is counting bottles and costing plates. A brand with a co-packer, a warehouse, and wholesale customers has a different job. The requirements that matter are these:

  • Lot and batch tracking from receiving through production to the customer
  • Expiry dates captured at goods-in and carried through transfers, adjustments, and production jobs
  • Pick rules that follow first in, first out (FIFO) or first expired, first out (FEFO)
  • Bills of materials that reflect real yield, not the recipe on paper
  • Landed cost for freight, duty, and packaging that belongs in inventory
  • An accounting sync that carries cost, not only quantity

Restaurant inventory tools or inventory software for a brand: which one fits?

Restaurant tools fit businesses that cook and serve. Inventory platforms such as Cin7 Core fit businesses that manufacture, store, and ship packaged goods to retailers, distributors, and online customers.

The restaurant category is built around the back of house. Restaurant platforms are built around counting and recipe costing, while packaged brands need lot-level traceability. A brand selling cases to a retailer needs a cost that flows into the general ledger, which is a different data model.

NeedRestaurant back-of-house toolsInventory platform such as Cin7 Core
Main jobCount stock, cost recipes, scan supplier invoicesTrack lots, expiry, production, and multi-location stock
FitsRestaurants, bars, hotelsPackaged food and drink brands, distributors, co-manufacturers
Where setups tend to stallMoving to wholesale and ecommerce channelsCosting method, expiry capture, and accounting mapping

If you also run a venue, you may need both. For the packaged side of the business, the decision that matters is how the platform values stock and how that value reaches the books.

Can QuickBooks Online or Xero track lots and expiry dates on their own?

No. QuickBooks Online values inventory on a FIFO basis or a moving average cost basis, and Xero holds stock as a quantity at an average cost. Neither records which batch a unit came from or when it expires.

That gap is why brands add an inventory platform on top of the accounting system. It also creates the first place data drifts: the inventory platform may value a unit at the cost of a specific batch, while the accounting system only ever sees a total. When the two disagree, the reconciliation difference needs to be traced back to the source, and it surfaces at month end. The pattern is covered in detail in how to reconcile Cin7 Core and QuickBooks Online.

What does Cin7 Core cost for a food and beverage brand?

Cin7 Core's Standard plan is $349 a month with five users and 6,000 sales orders a year, Pro is $599 a month with material requirements planning, and Advanced is $1,199 a month with advanced warehouse management. Prices are in USD, exclude taxes, and apply to new customers.

For a brand with a production line, the Pro plan is where planning tools appear, and a multi-warehouse operation will look at Advanced. Each plan lists a fixed number of ecommerce and app integrations, so count your channels, 3PLs, and shipping tools before you choose. Cin7 lists a custom tier for businesses with multiple warehouses or complex supply chains, and prices that one by conversation.

Cin7 suits brands that need lot tracking, production, and an accounting sync in one system. It is the wrong fit for a single-location kitchen that only needs recipe costing and supplier invoice capture. For a wider comparison across systems, read whether Cin7 is right for your business.

Why does the margin on a food batch not match the books?

Usually because the costing method does not match how the warehouse picks stock. If the floor ships the earliest expiry first but the system costs by arrival order, cost of goods sold lands on the wrong batch.

Cin7 Core offers FEFO as a costing method for products where expiry dates matter, alongside FIFO by batch and special batch costing. Once a product uses FEFO, an expiry date has to be entered for every batch received, so dated stock cannot be booked in without a date. That single rule closes the most common gap.

These symptoms recur across food and drink setups, and each traces to an upstream cause that sits away from the report where it appears:

SymptomLikely root causeFix
Margin on a batch moves month to monthCosting method does not match the pick ruleAlign costing and picking, then review open batches
Short-dated stock found at stocktakeExpiry missed at goods-in or pallets picked by proximityMake expiry mandatory, scan to select the batch
Production variance lands in the ledgerBill of materials ignores real yieldUpdate recipes against actual consumption
Inventory value changes with no new transactionSupplier invoice authorised after the stock was soldTrace it in the purchase ledger, not the stock ledger
Landed cost missing from product marginFreight and duty booked to expensesSet up landed cost so it enters inventory

The fourth row catches finance teams out. When a supplier invoice is authorised after the related stock was fulfilled, Cin7 rewrites the original estimated cost, which is why inventory valuation can change without any new transaction. The fifth is a recurring cause of thin margins, and the guide to tracking landed costs in Cin7 shows how to configure it.

How does lot tracking help with a recall?

Lot tracking lets you find which customers received a batch in minutes instead of days. Cin7 Core's Batch/Lot Recall report works from products that have been sold, so the quality of the answer depends on the batch data you entered at receiving and production.

The regulatory clock makes this more than a safety habit. The FDA's Food Traceability Rule requires covered businesses to keep Key Data Elements tied to Critical Tracking Events and provide information to the FDA within 24 hours. The compliance date was extended to July 20, 2028, but retailers and distributors can write traceability into supplier terms sooner. The records you will need are created at receiving, production, and shipping, so the system has to be configured for them today.

How to set up food and beverage inventory so the data holds

Work through these steps with your operations lead and your bookkeeper. Each one is specific enough to run this week.

  1. Choose the costing method per product before you receive stock. Use FEFO for anything with an expiry date and FIFO by batch for long-life lines. Tracking is tied to the costing method, so the choice has to be made when the product is created.
  2. Make expiry mandatory at goods-in. Train receivers to enter the batch number and date from the carton, and stop the putaway if either is missing.
  3. Write a batch numbering convention. Cin7 Core does not check for duplicate batch numbers on its own, so a documented format and one owner keep lots unique.
  4. Send pickers to the batch the system selected. Scanning in the warehouse app confirms the right batch left the building, and overrides should need a reason.
  5. Audit bills of materials against real yield every quarter. Compare what production jobs consumed with what the recipe says, and fix the recipe, not the journal.
  6. Set up landed cost for freight, duty, and packaging. These belong in inventory value so product margin reflects the true cost of the unit.
  7. Run a lot-level reconciliation to QBO or Xero each month. Compare inventory value in the platform with the balance sheet and trace any gap to a batch before closing the period.
  8. Adopt a retroactive change policy. Decide who can edit a receipt or invoice after a period closes, and log every exception. This governance step stops the drift from returning.

A receiver who skips an expiry date on a busy Friday undoes the configuration, so adoption belongs in the project plan.

Should you patch your current setup or rebuild it?

Patch when the gap is one setting, such as a costing method on a handful of products. Rebuild when expiry capture, bills of materials, landed cost, and the accounting mapping are all out of line with how the business runs.

The Fiskal Score shows where a setup falls short across People, Systems, and Finance, including inventory management, purchasing and receiving, inventory valuation and COGS, and ERP to accounting reconciliations, so the decision rests on specifics. Food and beverage brands working with Fiskal include Darë Vegan Cheese, and the Darë Vegan Cheese customer story is worth reading alongside this one.

If lots and dates are captured in the system and the numbers still disagree, the sync may be working while the mapping logic is wrong. Cin7 onboarding support is the route to resolving it. It fixes the setup and gets your team using it as designed. The food and beverage industry page shows how the work connects from implementation through bookkeeping and controlling.

Frequently asked questions

What is the right inventory management software for a food and beverage brand?

The right software tracks lots and expiry dates, picks stock by FEFO or FIFO, and passes cost accurately to QuickBooks Online or Xero. For packaged brands, an inventory platform such as Cin7 Core fits better than restaurant back-of-house tools.

Does Cin7 Core support expiry dates and FEFO?

Yes. Cin7 Core uses FEFO as a costing method, and once a product uses it an expiry date has to be entered for every batch received. The result depends on how carefully receiving is configured and followed.

How much does Cin7 cost for a food business?

Cin7 Core plans start at $349 a month for Standard, $599 for Pro, and $1,199 for Advanced, in USD for new customers. Larger operations with several warehouses are quoted a custom price.

Can QuickBooks Online handle batch and expiry tracking?

No. QuickBooks Online values inventory using FIFO or moving average cost and does not record batch numbers or expiry dates. Brands that need lot traceability pair it with an inventory platform and reconcile the two.

When do food brands need to meet FDA traceability rules?

The FDA moved the Food Traceability Rule compliance date to July 20, 2028. Some retailers and distributors write traceability into supplier terms earlier, so the data you capture at receiving now is the data you will need to produce.

The Fiskal Score //

Want this sorted in your business?

We start with the Fiskal Score, a 100 point read on your people, process and technology.

Keep reading

Cin7 Core vs Cin7 Omni: which one fits your business

Cin7 Core is the self-serve platform with published plans, and Cin7 Omni is the customisable platform quoted by demo. This post shows how to pick between them by tracing one order through to QBO or Xero.

Fiskal6 min read